DariusP

I am currently taking on all the carpentry jobs in a house renovation I am having done. The last time I did 'proper' carpentry was 30 years ago in school, although I spent much of my 20's hungover on the sofa watching Norm on New Yankee Workshop on the Discovery Channel!

So far I have built some fitted shelves and alcove units but I am now going to build some stand alone shelving units with integrated desk. The whole span is about 4m and this will be made up of individual cabinets about 42cm wide and 284cm high. The joins will then be covered with beading of some sort.

I managed to download an episode of New Yankee Workshop with a similar project and am following that as a template. So each cabinet will have fixed shelves near the top and bottom dadoed (is that even a word) into the standards. The back will be rabbeted in.

In the video, the shelves are glued into the dados and then held in place by toenailing brad nails. So my first question is can anyone provide a recommendation for a good electronic nail gun with which I will be able to achieve this toenailing. All the ones I have looked at seem to only be good for 90 degree nailing and I don't want to have to buy a whole compressor system. Or, is there a better/another way of doing this? Is the glue alone enough if clamped well enough?

The second question is that Norm uses 3/4" ply for this job, could I get away with 3/4" MDF? (I know I should use metric and being from a scientific background, completely approve; however there is something about working with wood that makes me want to work in imperial

Any advice would be greatly appreciated.

Regards

Darius

I have been performing small DIY jobs for many years but am now renovating a house and since my builders idea of a finish does not align with mine, have taken on all the shelving and cabinet carpentry jobs. Thanks to some good books and YouTube, I am working my way through them, feeling as I go, but am joining this forums to get others' expert advice.

Hi DariusP,

Welcome to The DIY Forum, and thanks for joining us here.

Please feel free to browse around and get to know others. If you have any questions please don't hesitate to ask.

I certainly look forward to hearing from you sometime soon, and hearing all about your DIY experiences...

Be sure to check out the DIY Forum rules above, just to ensure were all on the same page...

Why not tell us a little about yourself, let others get to know you, and what you get up to?<font size="3"><font size="2">

Please do NOT post links to your business, adverts or any other kind of spam. New members posting links to their business/shop or who seem to be here ONLY to plug their business WILL be deleted and flagged as a spammer with ALL Invision Powerboard Forums!</font></font>

Welcome again

Richard... DIY Forum Slave