giraffe76 Posted September 21, 2019 Report Share Posted September 21, 2019 Hi all, I wasnt sure where to put this post so please move it to the correct place if needed. We are moving into my mother in laws house to help her to do it up. The whole house has very old fashioned tilt and turn windows and the top metal support bracket on the window in our room has somehow bent upwards. We have had some companies out to give us quotes but they all say that the whole window needs changing but i was wondering if i could get a small metal hammer and try to knock it back into the position it was to support the window so we can close it as at the moment when we try to close the window its leaving a small gap at the top right to allow cold air in and with it heading towards winter it will get extremely cold in there. Ive tried to get a photo to show more clearly but i cant seem to download it from my phone so i hope ive explained it properly Any help or advice would be much appreciated kind regards Mark Link to comment Share on other sites More sharing options...
Recommended Posts