Alan Posted February 26, 2008 Report Share Posted February 26, 2008 The Sagulator helps you design shelves by calculating shelf sag (deflection) given type of shelf material, shelf load, load distribution, dimensions, and method of attachment. You can also specify an edging strip to further stiffen the shelf. Link to comment Share on other sites More sharing options...
verne Posted April 18, 2009 Report Share Posted April 18, 2009 a wise old chap once gave me a piece of advice that has served me well through my working life and many diy projects..."if it looks right - then it is right!"of course you have to know what it should look like first at each stage of the repair, installation or construction and then it is just a matter of "monkey see; monkey do" until sufficient successful projects have been completed and mistakes made and rectified gives a person enough accumulated knowledge and imagination to be able to make a good job of designing and completing projects that do not visibly sag...being amed with all this knowledge and experience does have one small drawback - it does lead to a tendency of overkill! Link to comment Share on other sites More sharing options...
Recommended Posts